The segment comprises a number of specialized products for diverse areas of application. The design spectrum extends from consistent functionality for industry and commerce to authentic ceramics for stylish public and private areas.

Special Ceramics

Seite ausdrucken
Colour chart 1 2 3 4 5 6
Survey of articles 1 2 3 4 5 6 7

Eladuct

Made in Germany
Trittsicherheit
R10
Static electricity conducting stoneware tiles, unglazed Conductive Floor Coverings
 
355S
red-brown, unglazed
 
These two specific solutions – as a stoneware tile (Eladuct) on the one hand and as a ceramic large-size panel in model size 60 x 60 cm on the other (ELA 10.6) – are suitable for use in those areas where electrostatic charge requires a conductive floor covering or where the latter is recommended. The special laying instructions must be followed carefully. We shall be delighted to advise you and to give you assistance for individual applications.
 
         
  Sectional Drawing
Eladuct  
 


* Number and arrangement depending on the technical requirements. Connection only by an electrical specialist in line with the relevant guidelines.

In the case of Eladuct, static electricity is discharged through the tile body. Electrical leakage resistance RA according to DIN EN 1081: 108 Ohm.




  is especially predestined for those areas where the discharge of static electricity is desired together with the advantages of an unglazed surface (high mechanical-chemical stress resistance). Examples: gravure and flexographic printing areas, laboratories, rooms for lacquer production, processing and decanting, munitions dumps, chemical production plants etc.
  1. * Copper strips for connecting to earth
  2. Joint
  3. Eladuct tile
  4. Conductive adhesive mortar
  5. Base
 

KerAion ELA 10.6

Made in Germany
Trittsicherheit
R9


2401 RH · IV grey, glazed
(RH = non-slip version)
 


Sectional Drawing


* Number and arrangement depending on the technical requirements. Connection only by an electrical specialist in line with the relevant guidelines.

In the case of ELA 10.6, static electricity is discharged via the four overglazed panel edges.
Volume resistance according to Procedure C pursuant to DIN EN 1081: 106 Ohm.

In the case of ELA 10.6, static electricity is discharged via the four overglazed panel edges.
Electrical leakage resistance RA according to DIN EN 1081: 106 Ohm.

KerAion ELA 10.6

is recommended for those areas where the discharge of static electricity is desired and importance is attached to the advantages of a glazed surface (e.g. very easy to clean) and a generous, representative look. Examples: office rooms, production rooms for electronic equipment, physical measuring and work rooms, laboratories, rooms for microchip and computer manufacture, medical areas (e.g. operating theatres), telecommunication workshops, sales areas for electronic equipment etc.
  1. * Copper strips for connecting to earth
  2. Conductive joint
  3. Conductive special glaze
  4. KerAion panel
  5. Conductive adhesive mortar
  6. Base